![pioneer sound deck pioneer sound deck](https://www.fryderykdanielczykstore.com/wp-content/uploads/2021/02/41-1.jpg)
![pioneer sound deck pioneer sound deck](http://williamhpeck.org/yahoo_site_admin/assets/images/Bensonthree42.302112818_std.jpg)
Deck 1 and 3 will be controlled by the left side, deck 2 and 4 will be controlled on the right side. The deck select button is available on all 4 channel controllers and also on some 2 channel units. So drag a track to deck section one and two of the interface and wait for them to load up.
PIONEER SOUND DECK SOFTWARE
Most DJ software will let you simply drag and drop tracks to the deck sections of the interface. Your controller will be mapped to work with certain brands of software like Serato, Rekordbox, virtual DJ, etc. All controllers will vary slightly so we’ll just look at the controls found on every deck section. We’ve already covered mixers in a separate post HERE, so we’ll go straight to the deck sections. All of the basic controls on the mixer will work exactly the same as any stand alone mixer. “This is a nice basic controller with an easy learning curve that will not overwhelm beginners…But it still has plenty to offer “ Check Price DJ controllers and their functionsĪ controller consists of two mixing decks (deck sections), with a mixer in the centre.
PIONEER SOUND DECK HOW TO
You can find out what order to use HERE under how to set up DJ decks and equipment. You must always turn your equipment on in the right order to avoid causing any damage. Lastly Connect your power lead, but don’t turn the equipment on yet. You will need to buy a separate sound card to link the two together before you can continue. If you don’t see a USB socket this means your controller does not have a built in sound card. USB B will be used for a second laptop during DJ handovers or back to back sessions. If you see two sockets like the picture above, use USB A and assign this socket on the mixer section. Next you can plug in your laptop, this will be connected to the USB socket.
![pioneer sound deck pioneer sound deck](https://asset.conrad.com/media10/isa/160267/c1/-/en/1651069_BB_00_FB/image.jpg)
Be sure to use channels 1 and 3 for left decks, and channels 2 and 4 for right decks. These separate decks can be assigned using simple switches on the mixer section. Some controllers will let you plug in extra mixing decks, these will be plugged into the sockets marked ch1, ch2, etc. You’ll control both of the volumes on the mixer section of the controller. If you’re using separate DJ monitors you’ll connect these to the booth sockets. If you’re using RCA plugs be sure to connect white to white and red to red and every socket. The first thing you’ll need to do is connect your active speakers or amplifier, these will be connected to the master outputs. The rear of your controller will have multiple sockets for connecting your hardware. Connecting a DJ controller to speakers and a laptop We’ll cover stand alone mixing decks and all-in-one units later. Controllers do not accept CD’s or USB drives, if you need this option you’ll need stand alone mixing decks. To use a DJ controller you will need a laptop which you will connect to playback your music library.
![pioneer sound deck pioneer sound deck](https://www.radiomuseum.org/images/radio/pioneer_corporation/stereo_double_cassette_deck_2413856.jpg)
They offer great value for money, easy transport for working DJ’s, and a lot more features than stand alone decks.